| Applications | Die-casting Product |
|---|---|
| PLC | Mitsubishi Of Japan |
| Energy-saving | 20% |
| Cost Reducing | 30-40% |
| Products Weight | 2-10KG |
| Applications | Die-casting Industry |
|---|---|
| The Cleaning Medium | Hydrocarbon Solvents |
| Work Speed | 5-7min / Basket |
| Vacuum Pump Lubricating Oil | 0.2L/200 Hours |
| Ultrasonic Frequency | 40 KHz |
| Applications | Die-casting Aluminum |
|---|---|
| Relative Humidity | Less Than Or Equal To 90% |
| Water Pressure | 0.3Mpa |
| Main Power Supply | 380±10%/50HZ |
| Electronic Control System | Omron PLC |
| Applications | Aluminum Die Castings |
|---|---|
| PLC | Mitsubishi Of Japan |
| Spray Pressur | 120bar |
| Power Supply | 380±10%/50HZ |
| Dryer | 70℃ |
| Applications | Magnesium Aluminum Alloy High-pressure Casting |
|---|---|
| Product Qualification Rate | Over 98% |
| Energy-saving | 20% |
| Cost Reducing | 30-40% |
| Efficiency Increased | 10-30% |
| Applications | Small Metal Parts |
|---|---|
| Load Capacity | Up To 1 Ton |
| Water Pressure | 0.3Mpa |
| Main Power Supply | 380±10%/50HZ |
| Inner Tank size | L815×W820×H1550mm |
| Applications | Die-casting Industry |
|---|---|
| The Cleaning Medium | Hydrocarbon Solvents |
| Work Speed | 5-7min / Basket |
| Vacuum Pump Lubricating Oil | 0.2L/200 Hours |
| Ultrasonic Frequency | 40 KHz |
| Applications | Die-casting Industry0000000000 |
|---|---|
| The Cleaning Medium | Hydrocarbon Solvents |
| Work Rhythm | 5-7min / Basket |
| Power Supply | 380±10%/50HZ |
| Ultrasonic Frequency | 30-50 KHz |
| Applications | Decorative Items |
|---|---|
| Oxide Layer Thickness | 5–20 Microns, |
| Relative Humidity | Less Than Or Equal To 90% |
| Water Pressure | 0.3Mpa |
| Main Power Supply | 380±10%/50HZ |
| Applications | Tempered Glass |
|---|---|
| Total Ultrasonic Power | 7.5 KW |
| Equipment Capacity | 3-5 Minutes / Basket |
| Power Supply | 380±10%/50HZ |
| Heating Temperature | 60℃ |