Iron Hardware Automatic Ultrasonic Cleaner With High Temperature Spray Drying For Furniture Fittings

 ordinal

1 section (section 2); 1 work station

 Washing tank 

 structure

Inner tank size

L900×W780×H300mm (provisional, effective use height 300mm).

 material

SUS304,2.5mm thick, single mirror stainless steel plate.

Configuration instructions

The cover of ultrasonic cleaning tank can up and low for control . When the product flows to this station, the top of the upper and lower cylinders lifts the seal, and the water pump starts to inject water. When the liquid level reaches the specified height, the ultrasonic starts to clean the product. After the time, the water is discharged from the bottom

Ultrasonic system

 vibrator

The number of ultrasonic shockers is 30 per tank, and the power of each shocker is 60W.

Ultrasonic power: 1800W/cage.

Ultrasonic frequency: 28KHZ.

The ultrasonic output power is continuously adjustable, and all the ultrasonic transducers are imported from NTK in Japan.

 ultrasonic

 generator 

It adopts the method of excitation and has a scanning circuit, and the output power is continuously adjustable.

 circulating filtration

Storage tank

 material

SUS304 single mirror panel, 2.5mm thick, equipped with a closed cover, and thermal insulation cotton is attached outside the groove.

 configure

The tank is equipped with liquid level control, automatic shutdown of circulation pump and heating system without liquid, and sound and light alarm.

 heat

SUS304 tubular heater is heated with a heating power of 6KW/cylinder.

 heating control

Japanese "Omron" digital display temperature control.

 filtration pump

Hangzhou "Lingxiao" single pole centrifugal pump is adopted.

Filter accuracy

10u, stainless steel filter, bag filter.

 dissolvant

 organic solvent