Advantages of carbon hydrogen cleaning machine

Advantages of carbon hydrogen cleaning machine:

1. Environmental protection: No discharge, can be naturally degraded, does not damage the environment. Hydrocarbon cleaning agent can be automatically degraded, and the waste liquid can be put into coal-fired or oil-fired boilers for incineration. The main combustion products are CO2 and water, which do not pollute the air. Hydrocarbon cleaning agent does not contain chlorine, and the ozone destruction coefficient is zero.

2. The evaporation loss is small: The hydrocarbon cycle can be reused with a recovery rate up to 99%. The hydrocarbon cleaning agent has a high boiling point, so the evaporation loss is small during use and storage, and the sealing requirements for packaging and equipment are very low.

3. Extremely low toxicity:According to the toxicological test, the inhalation and release toxicity, oral toxicity and skin contact toxicity of hydrocarbon cleaning agent are all ultra-low toxicity, and it is not a carcinogen, so the cleaning operation personnel can use it more safely.

4. Good material compatibility:Hydrocarbon cleaning agent does not contain water, chlorine, sulfur and other corrosive substances, will not cause corrosion and oxidation to various metal materials. Hydrocarbon cleaning agent is a non-polar solvent, has no dissolution, swelling and embrittlement effect on most plastics and rubber.

5, Can completely volatilize without residue:Carbon hydrogen cleaning agent is a very pure and refined solvent, which can be completely volatilized at room temperature and heating, without any residue.

6, good cleaning performance:Hydrocarbon cleaning agents, like most lubricants, rust inhibitors, and machining oils, are non-polar petroleum fractions. According to the principle of like dissolves, hydrocarbon cleaning agents are better at cleaning mineral oils than halogenated hydrocarbons and water-based cleaning agents.

7. Low consumption of cleaning agent: About 0.8-1.2L/h consumption of cleaning agent (depending on the workpiece), low energy consumption: 50% less power than ordinary water-based cleaning machine.