Automatic aluminum alloy cleaning and passivation line surface treatment equipment
Equipment model: HS-6240STP
Overview:
Automatic aluminum alloy cleaning and passivation line is widely used in aviation, aerospace, automobile, electronics and other fields, the processed products have excellent performance of corrosion resistance and beauty.
HS-6240STP has stable performance, reasonable structure and reliable operation. The cleaning speed and cleaning effect have been approved by users.
Process:
manual feeding--ultrasonic degreasing No.1--ultrasonic degreasing No.2--ultrasonic washing No.3--passivation No.4--ultrasonic pure water washing No.5--pure water washing No.6--blow water manually--tunnel furnace drying--convey to the full inspection platform
2-1. Cleaned objects: aluminum alloy surface stretching die oil, metal chips (after product die casting, some metal powder is attached to the surface and is not easy to fall off), dust and other impurities. During cleaning, the workpiece should not be scratched, bumped, discolored, deformed, or changed in performance and other irreversible damage.
2-2, cleanliness requirements: no oil stain and water mark on the surface, the workpiece is dry.
2-3 Suitable cleaning fluid
City water, cleaning agent, pure water
2-4 Cleaning beat: about 5-8min adjustable
1) The rhythm of lifting, putting in and carrying the basket is 60~90S.
2) Special aluminum alloy cleaning agent.
Be cleaned t workpiece
|
Be cleaned t workpiece
|
Aluminum alloy products, the maximum product size is 600*400*20MM, the conventional 150*150*30MM and 200*150*30MM. |
| Specification of cleaning tank |
815*820*550MM |
| Washing basket |
12 pcs |
| capacity |
150*150*30MM, 10 hours of production capacity is about 5400 pieces, see the drawings for details. |
Equipment working requirements
|
Size of footprint
|
(L*W*H) is subject to the drawings. The equipment adopts left in and right out mode. (L*W*H) is subject to the drawings. The equipment adopts left in and right out mode.
|
|
source
|
380V±10%/50Hz, three-phase five-wire; the power distribution of the whole machine requires more than 70KW.
|
|
pure water
|
Consumption of 5~15L per minute; see the equipment peripheral supporting quotation for pure water machine
|
|
natural gas
|
Users provide their own equipment, and the burner is quoted in the equipment surrounding accessories
|
|
Inlet pipe diameter
|
1.25″; total discharge pipe diameter is greater than or equal to 2″
|
4. Working environment requirements:
Air temperature: 5~40℃ Air temperature: 5~40℃
Relative humidity: less than 80% Relative humidity: less than 80%
Factory grade: clean factory (actual) Factory grade: clean factory (actual)
Your message must be between 20-3,000 characters!
