Gantry Type Anodizing Oxidation Assembly for Decorative items

Gantry Type Anodizing Oxidation Assembly for Decorative Items

Gantry Type Anodizing Oxidation Assembly Overview:

The sulfuric acid anodizing setup is a reliable choice for standard anodization. It offers stable anodizing conditions, producing consistent oxide layers. The adjustable parameters allow customization for different materials and requirements. With a simple operation interface, it’s easy to use for both small - scale and large - scale production, providing cost - effective anodizing solutions.

Partial parameter description of Gantry Type Anodizing Oxidation Assembly:

Basic composition and technical requirements of equipment

1. Function tank configuration

1-1 The first station: loading station

1-2 The second tank: chemical degreasing tank

1-2-1 structure:

Made of 3mm SUS304 material, the tank is guaranteed not to deform and not to leak, with good corrosion resistance and beautiful appearance. The bottom of the tank is equipped with a side drainage port.

1) Tank size: 800×4000×1600mm (L×W×H)

2) Reinforcement of the tank: 80*40*4mm square tube made of A3 material is welded, the thickness of the tank insulation layer is 50mm, the material is 100K rock wool, and the outer plate is 1mm thick SUS304 stainless steel plate with rivet.

3) A set of SS serpentine steam heating tubes (on both sides) are installed in the tank.

4) Two exhaust hoods are arranged on both sides of the slot and connected to the exhaust main pipe (separately).

For a complete technical solution of Gantry Type Anodizing Oxidation Assembly, please contact me. We will customize the design based on your product technical requirements and factory layout.

Basic process flow Of Gantry Type Anodizing Oxidation Assembly:

        Feed material → 1 Chemical degreasing → 2 Water washing → 3 Alkali etching → 4 Water washing → 5 Water washing → 6 Acid washing → 7 Water washing → 8 Water washing → 9 Anodizing → 10 Anodizing → 11 Anodizing → 12 Water washing → 13 Water washing → 14 Coloring → 15 Water washing → 16 Coloring → 17 Water washing → 18 Coloring → 19 Water washing → 20 Coloring → 21 Water washing → Unloading

Working conditions Of Gantry Type Anodizing Oxidation Assembly:

Our typical customers:

Installation and training Of Gantry Type Anodizing Oxidation Assembly:

1. Installation

1) The seller shall provide all details of the equipment installation to the user in order to prepare the installation site.

2) The seller shall install and debug the equipment at the user's factory site.

2. Training

During the installation, the seller provides on-site training for plant operators, including normal operation, maintenance, analysis of operational problems and emergency procedures.