Industrial RO reverse osmosis pure water equipment
Overview:
The reverse osmosis (RO) pure water equipment is a device used for producing pure water and ultra-pure water in industries such as electronics, industry, medicine, and food. The reverse osmosis system is small in size, easy to operate, and has a wide range of applications. By using the reverse osmosis system to treat industrial water, no large amounts of acids or bases are consumed, there is no secondary pollution, and the operating costs are also relatively low.
Product Details
The effluent quality of this product can meet the water purification standard, with a conductivity of ≤5-20us/cm. It supports customized water treatment equipment with a capacity of 0.25T-100T/H
1. The equipment configuration adopts pretreatment + reverse osmosis main unit, effectively removing various salts and impurities, efficiently producing water, meeting water quality standards, and with low operating costs
2. It operates fully automatically with AI and is equipped with safety protection devices such as water shortage protection and low pressure protection
3. The complete set of configuration is complete, with an integrated structure, occupying less space and being easy to install and use
4. Imported coconut shell activated carbon has an adsorption effect more than five times that of ordinary activated carbon, effectively protecting the service life of RO membranes
5. Advanced quartz sand technology, with a filtration effect three times that of ordinary quartz sand, and multiple protections for the service life of RO membranes
6. Imported high-precision RO reverse osmosis membranes are used, with a filtration accuracy of up to 0.0001 microns, and the pure water can be drunk directly
7. High-pressure pump pressurization and intelligent water outlet protection system make it more convenient to use
Design basis of Industrial RO reverse osmosis pure water equipment
Raw water source |
The local municipal tap water has a conductivity of less than 400μs/cm. |
|
|
Ultra-pure water capacity |
2t/h. |
|
|
Ultra-pure water resistivity |
≤ 15MΩ·CM. |
|
|
Design temperature |
25℃. |
|
|
Mode of operation |
Automatic operation (manual adjustment) |
|
|
Design boundaries |
The raw water tank is connected from the inlet to the outlet of the water supply. |
Process flow chart