Workpiece Name | Small Tools |
---|---|
Maximum Part Size | 300×300×200mm |
Curing Time | 1 - 3 Minutes |
Control The Power | Single Phase AC220V-50Hz Single Phase + Ground Wire |
Drive Power | Three-phase AC380V-50Hz Three-phase Five-wire System |
Applications | Auto Parts |
---|---|
PLC | Mitsubishi Of Japan |
Height Of Conveying | 1000±50mm |
Power Supply | 380±10%/50HZ |
Inner Tank size | L815×W820×H1550mm |
Applications | Furniture Fittings |
---|---|
PLC | Mitsubishi Of Japan |
Spray Pressur | 130bar |
Power Supply | 380±10%/50HZ |
Dryer Temperature | 60-80℃ |
Applications | Kettles |
---|---|
Conveyor Speed | 1-5m/min |
Spray Pressur | 120bar |
Power Supply | 380±10%/50HZ |
Dryer Temperature | 70℃ |
Workpiece Name | Outdoor Equipment |
---|---|
Maximum Workpiece Size Can Be Used | L1300*W1100*H1300mm Maximum Product Size |
Heating Time | 0~15min |
Hanging Fixture Spacing | 150mm |
Control The Power | Single Phase AC220V-50Hz Single Phase + Ground Wire |
Workpiece Name | Aluminum Profiles |
---|---|
Maximum Workpiece Size Can Be Used | L4000*W800*H2000mm Maximum Product Size |
Control | PLC |
Standard Sieve | 350 Microns |
Control The Power | Single Phase AC220V-50Hz Single Phase + Ground Wire |
Workpiece Name | Heavy - Duty Parts |
---|---|
Production Speed | 0~10-min/batch |
Environmental Temperature | 0℃~45℃ Is Most Suitable |
Relative Humidity | Less Than Or Equal To 90% |
Water Pressure | 0.3Mpa |
Workpiece Name | Military Applications |
---|---|
Coating Thickness | 30 - 60μm |
Environmental Temperature | 0℃~45℃ Is Most Suitable |
Relative Humidity | Less Than Or Equal To 90% |
Water Pressure | 0.3Mpa |
Applications | Stainless Steel Tubes |
---|---|
Conveyor Speed | 3-10m/min |
Spray Pressur | 170bar |
Power Supply | 380±10%/50HZ |
Dryer Temperature | 75℃ |
Applications | Steel Gears |
---|---|
Conveyor Speed | 2-8m/min |
Spray Pressur | 200bar |
Power Supply | 380±10%/50HZ |
Dryer Temperature | 75℃ |