vr
Rumah /Produk/Barang Konsumsi/Medium-temperature Sealant for Anodic Oxide Films with pH 5.5 and 10 Kg/Box Packaging for 3-4m²/g Coverage

Medium-temperature Sealant for Anodic Oxide Films with pH 5.5 and 10 Kg/Box Packaging for 3-4m²/g Coverage

10 Kotak
MOQ
$10-$15/Box
harga
Medium-temperature Sealant for Anodic Oxide Films with pH 5.5 and 10 Kg/Box Packaging for 3-4m²/g Coverage
fitur Galeri Deskripsi Produk bicara sekarang
fitur
Spesifikasi
Menggunakan: Film Oksida Anodik Dari Aluminium Dan Paduan Aluminium
Penampilan: bubuk hijau muda
Kemasan: 10Kg/Kotak
Menyoroti:

pH 5.5 Medium-temperature Sealant

,

10 Kg/Box Anodic Oxide Film Sealant

,

3-4m²/g Aluminum Alloy Sealant
Informasi dasar
Tempat asal: Dongguan
Nama merek: Hongshun
Sertifikasi: ISO9001
Nomor model: HS-Segel102
Syarat-syarat pembayaran & pengiriman
Kemasan rincian: KOTAK
Waktu pengiriman: 10 hari
Syarat-syarat pembayaran: L/C,T/T
Menyediakan kemampuan: 500 ember/bulan
Deskripsi Produk
Medium-temperature Sealants For Anodic Oxide Films Of Aluminum And Aluminum Alloys
Medium-temperature sealants for anodic oxide films of aluminum and aluminum alloys provide excellent sealing performance with a smooth, fine finish. These sealants effectively prevent common issues such as dye fading, powder film formation, and gray mist appearance.
Key Features
  • Superior sealing quality for demanding applications
  • Ideal for electronic product casings and high-end cosmetic packaging
  • Excellent cost-performance ratio compared to market alternatives
  • Light green powder formulation
Application Method
When preparing the bath solution, maintain pH at 5.5. Note that pH levels may fluctuate with use due to water, acid, and base introduction.
  • Use acid-resistant, high-temperature filters for solution filtration
  • Adjust pH with dilute acetic acid (to lower) or NaOH (to raise)
  • Product specific gravity varies by processing conditions (approximately 3-4m²/g)
Analytical Procedure
  1. Combine 10ml sealing solution with 100ml pure water
  2. Add 10ml 6N-ammonia water and 2-3 drops triethanolamine
  3. Mix in 0.2g MX indicator (solution turns orange)
  4. Titrate with 0.01M-EDTA standard solution until purple-red endpoint (A ml)
Safety & Handling
  • Review product manual and MSDS thoroughly before use
  • Store away from heat sources in well-ventilated areas
  • Wear protective equipment (gloves, goggles, mask) during handling
  • In case of eye contact, rinse immediately with water for 15 minutes and seek medical attention
  • Maintain sealed storage and avoid prolonged exposure after opening
Label:

Agen pembersih ultrasonik

Aditif Pelapis Serbuk

Agen pasivasi

Rekomendasi Produk
Hubungi kami
Kontak Person : Jesse Tang
Tel : 8613929185382
Faks : 86--13929185382
Karakter yang tersisa(20/3000)
Berhubungan
Bangunan 1, No. 13, Jalan Sanheng, Lianhu Selatan, Kota Tangxia, Kota Dongguan
hongshunautomation@gmail.com
8613929185382
Tentang
Profil perusahaan Wisata pabrik Kontrol kualitas Hubungi kami
Produk
Sistem Passivasi OtomatisGaris Anodisasi Otomatisjalur pelapis bubuk otomatis Semua kategori
Kirimkan Kami
Beri tahu kami kebutuhan Anda. Kami akan menghubungkan produk terbaik dengan Anda.
Sitemap │ Situs Seluler │ Kebijakan pribadi
Cina Bagus Kualitas Sistem Passivasi Otomatis pemasok. © 2025 Dongguan Hongshun Automation Equipment Co., Ltd.. All Rights Reserved.