vr
Ana sayfa /Ürünler/Tüketilebilir Öğeler/Medium-temperature Sealant for Anodic Oxide Films with pH 5.5 and 10 Kg/Box Packaging for 3-4m²/g Coverage

Medium-temperature Sealant for Anodic Oxide Films with pH 5.5 and 10 Kg/Box Packaging for 3-4m²/g Coverage

10 Kutu
MOQ
$10-$15/Box
fiyat
Medium-temperature Sealant for Anodic Oxide Films with pH 5.5 and 10 Kg/Box Packaging for 3-4m²/g Coverage
Özellikleri Fotoğraf Galerisi Ürün Açıklaması Şimdi konuşalım.
Özellikleri
Teknik Özellikler
Kullanmak: Alüminyum ve Alüminyum Alaşımlarının Anodik Oksit Filmleri
Dış görünüş: açık yeşil toz
Ambalajlama: 10 Kg/Kutu
Vurgulamak:

pH 5.5 Medium-temperature Sealant

,

10 Kg/Box Anodic Oxide Film Sealant

,

3-4m²/g Aluminum Alloy Sealant
Temel bilgiler
Menşe yeri: Dongguan
Marka adı: Hongshun
Sertifika: ISO9001
Model numarası: HS-Mühür102
Ödeme & teslimat koşulları
Ambalaj bilgileri: KUTU
Teslim süresi: 10 gün
Ödeme koşulları: L/C,T/T
Yetenek temini: 500 kova/ay
Ürün Açıklaması
Medium-temperature Sealants For Anodic Oxide Films Of Aluminum And Aluminum Alloys
Medium-temperature sealants for anodic oxide films of aluminum and aluminum alloys provide excellent sealing performance with a smooth, fine finish. These sealants effectively prevent common issues such as dye fading, powder film formation, and gray mist appearance.
Key Features
  • Superior sealing quality for demanding applications
  • Ideal for electronic product casings and high-end cosmetic packaging
  • Excellent cost-performance ratio compared to market alternatives
  • Light green powder formulation
Application Method
When preparing the bath solution, maintain pH at 5.5. Note that pH levels may fluctuate with use due to water, acid, and base introduction.
  • Use acid-resistant, high-temperature filters for solution filtration
  • Adjust pH with dilute acetic acid (to lower) or NaOH (to raise)
  • Product specific gravity varies by processing conditions (approximately 3-4m²/g)
Analytical Procedure
  1. Combine 10ml sealing solution with 100ml pure water
  2. Add 10ml 6N-ammonia water and 2-3 drops triethanolamine
  3. Mix in 0.2g MX indicator (solution turns orange)
  4. Titrate with 0.01M-EDTA standard solution until purple-red endpoint (A ml)
Safety & Handling
  • Review product manual and MSDS thoroughly before use
  • Store away from heat sources in well-ventilated areas
  • Wear protective equipment (gloves, goggles, mask) during handling
  • In case of eye contact, rinse immediately with water for 15 minutes and seek medical attention
  • Maintain sealed storage and avoid prolonged exposure after opening
Etiket:

Ultrasonik Temizleme Maddesi

Toz Boya Katkı Maddeleri

Pasifleşme Ajanı

Önerilen Ürünler
Bizimle temasa geçin
İlgili kişi : Jesse Tang
Tel : 8613929185382
Faks : 86--13929185382
Kalan karakter(20/3000)
Temasta olmak
1. Bina, No. 13, Sanheng Yolu, Lianhu Güney, Tangxia Kasabası, Dongguan Şehri
hongshunautomation@gmail.com
8613929185382
Hakkında
Şirket profili Fabrika turu Kalite kontrol Bize ulaşın
Ürünler
Otomatik Pasifleşme SistemleriOtomatik Anodizasyon hattıOtomatik toz kaplama hattı Tüm Kategoriler
Mail Gönder
İhtiyaçlarınızı bize bildirin. En iyi ürünleri sizinle bağlayacağız.
Site Haritası │ Mobil site │ Gizlilik Politikası
Çin iyi Kalite Otomatik Pasifleşme Sistemleri tedarikçi. © 2025 Dongguan Hongshun Automation Equipment Co., Ltd.. All Rights Reserved.